"Personalize" Your Code
At this point, HIDmaker FS has done its job and has given your project a solid starting point: two “known good” programs that were created at the same time, and which know how to communicate with each other correctly. The USB part is done and working, so you can now concentrate on the things that you really set out to do in the first place: adding the real "personality" to your programs, on both the peripheral and the PC side, that makes your project do what you want it to.
We recommend that you make a copy of the original source code for both sides, then proceed to modify both of these programs, one step at a time. Add one feature or section of code, preferably on one side only, and test that new code carefully. We recommend that you get that feature working correctly before you move on. If something goes wrong, you’ll always know exactly where to look for the problem. That way, you’ll always have a working program at each step of the way, and things will never get out of control.
Home | About
Us | Contact Us
USB Tools | Consulting
